High Flow Intake Hose for Audi, Cupra, VW (RHD ONLY)

Please note this product is only compatible with right hand drive vehicles - please read instructions fully before installation - for the LHD, please see FMTIA9

Introducing the Forge High Flow intake hose for the revised 2021 onwards MQB platform 2.0 DNF code engines. This product replaces the restrictive plastic inlet pipe, with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

The Forge developed turbo inlet adaptor improves your vehicles airflow in several ways; designed in a similar way to a conventional velocity stack it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the intake system.

The plastic OEM inlet hose has ribs and steps within the bore causing turbulence and disturbing the airflow, the Forge Motorsport Silicone large turbo inlet hose has increased flow over the standard item and testing on the dyno certainly represent the huge benefits from such a well-engineered product.

The Forge Motorsport inlet pipe fits directly to the factory airbox along with most aftermarket performance intakes. On testing the Mk8 Golf R we found VWs bhp quotes conservative as our results showed 365bhp in complete stock attire.The hours of development and testing are translated into the results you can see on the dyno graph. This is a component which proven below definitely adds extra power.

Testing was completed at Litchfields on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and Dyno testing.

A Simple swap on the dyno to our FMTIA5 proved to enhance power and lower throttle response with gains of 12BHP and 15lb/ft torque at peak RPM along with around 8lb/ft and 8BHP in the midrange.

This is a simple installation and a modification that releases even more power from the VAG motor and fitting takes typically around 40 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. This product is available in black, blue, red, grey, and a limited-edition alien green.

• Manufactured from 6082 aerospace grade aluminium.
• Black anodised for ultimate protection and durability.
• Increased capacity of over 60%
• No engine check lights (EML)
• Increased air flow
• The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
• The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
• Lifetime warranty

Please read instructions fully before installation